View A025CN01-V3_5159357.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

s pec. no. 413-212-105 doc. version : 0 t o t a l p ages : 19 date : 2 0 0 1 . 1 0 . 1 5 product s p ecification 2.5 color tft -lcd module model n a m e : a 0 2 5 c n 0 1 v e r . 3 ( u p 0 2 5 d 1 1 -3 ) < >preliminary s pecification < > final s p ecification ? 2001 au optronics all right s reserved, do not copy . note : t h e con t en t of this speci f ication is subject to change. www.datasheet.co.kr datasheet pdf - http://www..net/
record of revision version revise date page content 1 28/may/2001 first draft www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 version : 1 page : 1 /19 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. contents: a. physical specifications p3 b. electrical specifications p4 1. pin assignment p4 a. tft-lcd panel driving section p4 b. backlight driving section p5 2. absolute maximum ratings p5 3. electrical characteristics p6 a. typical operating conditions p6 b. current consumption p6 c. backlight driving conditions p6 4. ac timing p7 a. timing conditions p7 b. timing diagram p7 c. optical specifications p8 d. reliability test items p10 e. packing form p11 www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 version : 1 page : 2 /19 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. appendix: fig.1 outline dimension of tft-lcd module p12 fig.2 sampling clock timing p13 fig.3 horizontal display timing range 3 p14 fig.4-(a) horizontal timing p15 fig.4-(b) detail horizontal timing p16 fig.5 vertical shift clock timing p17 fig.6-(a) vertical timing (from up to down) p18 fig.6-(b) vertical timing (from down to up) 3 p19 www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 version : 1 page : 3 /19 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. a. physical specifications no. item specification remark 1 display resolution(dot) 480(w)j 234(h) 2 active area(mm) 49.2(w)j 38.142(h) 3 screen size(inch) 2.45(diagonal) 4 dot pitch(mm) 0.1025(w)j 0.163(h) 5 color configuration r. g. b. delta 6 overall dimension(mm) 58.8(w)j 49.9(h)j 5.7(d) note 1 7 weight(g) 25d 5 note 1: refer to fig. 1 www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 version : 1 page : 4 /19 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. b. electrical specifications 1.pin assignment a. tft-lcd panel driving section pin no symbol i/o description remark 1 sthl i/o start pulse for horizontal scan line note 1 2 oeh i output enable input for data driver 3 q1h i analog signal rotate input 4 cph1 i sampling and shifting clock pulse for data driver 5 cph2 i sampling and shifting clock pulse for data driver 6 cph3 i sampling and shifting clock pulse for data driver 7 gnd - ground 8 vb i alternated video signal input(blue) 9 vg i alternated video signal input(green) 10 vr i alternated video signal input(red) 11 nc - this pin should be electrical opened during operation 12 l/r i left/right scan control input note 1,2 13 sthr i/o start pulse for horizontal scan line note 1 14 av dd i supply voltage for analog circuit 15 vcom i common electrode driving signal 16 v gh i positive power for scan driver 17 v cc i logic power for scan & data driver 18 stvl i/o vertical start pulse note 1 19 oev i output enable input for scan driver 20 ckv i shit clock input for scan driver 21 u/d i up/down scan control input note 1,2 22 stvr i/o vertical start pulse note 1 23 nc - this pin should be electrical opened during operation 24 v gl i negative power for scan driver www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 v e r s i o n : 1 p a g e : 5 /19 all rights strictl y reser v ed. any por t ion of this p a per shall not be reproduced, copied, or transformed t o any other forms without permission from au optronics corp . note 1 : selection of scanning mode setting of scan control input in/out st ate for st art pulse u / d l / r s t v r s t v l s t h r s t h l scanning direction g n d v cc o u t i n o u t i n from up to down, and from lef t to right. v cc g n d i n o u t i n o u t from down to up, and from right to lef t. g n d g n d o u t i n i n o u t from up to down, and from right to lef t. v cc v cc i n o u t o u t i n from down to up, and from lef t to right. in: input; out : output. note 2 : definition of scanning direction. refer to figure as below: b. backlight driving section (refer to fig.1) no. sy mbol i/o description rem a rk 1 hi i power supply for backlight unit ( high volt age) 2 g n d - g r o u n d 2. absolute max i mum ratings item sy mbol condition min. max. unit rem a rk v cc g n d = 0 - 0 . 3 7 v av dd a v ss = 0 - 0 . 3 7 v v gh - 0 . 3 1 8 v v gl - 1 8 0 . 3 v power volt age v gh v gl gnd=0 - 3 6 v v i - 0 . 3 a v dd + 0 . 3 v n o t e 1 v i - 0 . 3 v cc + 0 . 3 v n o t e 2 input signal volt age v c o m - 2 . 9 5 . 2 v operating temperature to p a 0 6 0 ambient temperature s t orage temperature ts t g - 2 5 8 0 ambient temperature www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 version : 1 page : 6 /19 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. note 1: vr, vg, vb note 2: sthl, sthr, q1h,oeh,l/r,cph1~cph3, stvr, stvl,oev,ckv,u/d. 3. electrical characteristics a. typical operating conditions (gnd=avss=0v) item symbol min. typ. max. unit remark v cc 3 5 5.2 v av dd 4.8 5 5.2 v v gh 14.3 15 15.7 v v glac 3.5 5 7.5 vp-p ac component of v gl. note 1 power supply v gl-h -10 -9.5 -9 v high level of v gl. v ia av ss +0.4 - av dd -0.4 v note 2 v iac - 3 - v ac component video signal amplitude ( vr , vg , vb ) v idc - av dd /2 - v dc component v cac 3.5 5 7.5 vp-p ac component,note 3 vcom v cdc - 1.1 - v dc component h level v ih 0.8 v cc - v cc v input signal volta g e l level v il 0 - 0.2 v cc v note 4 note 1: the same phase and amplitude with common electrode driving signal(vcom). note 2: refer to fig.4-(a) note 3: the brightness of lcd panel could be adjusted by the adjustment of the ac component of vcom. note 4: sthl,sthr,q1h,oeh,l/r,cph1~cph3,stvr,stvl,oev,ckv,u/d. note 5: be sure to apply gnd, v cc , v gl to the lcd first, and then apply v gh . b. current consumption (gnd=avss=0v) paramete r s y mbol condition min. t yp . max. unit remark i gh v gh =15v - 50 100 ? a i gl v gl-h =-10v - -0.3 -0.6 m a i cc v cc =5v - 1.5 4 m a current for driver i dd av dd =5v - 5 10 m a c. backlight driving conditions paramete r s y mbol min. t yp . max. unit remark lam p volta g e v l 210 230 250 vrms lam p current i l 2.4 2.7 3.0 marms fre q uenc y f l 55 60 65 khz note 3 - - 460 vrms note 1,4 lamp starting volta g e v s - - 690 vrms note 2,4 note 1: ta = 25 : note 2: ta = 0 : www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 version : 1 page : 7 /19 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. note 3: the lamp frequency should be selected as different as possible from display horizontal synchronous signal to avoid interference. note 4: for starting the backlight unit, the output voltage of dc/ac?s transformer should be larger than the maximum lamp starting voltage. 4. ac timing a. timing conditions parameter symbol min. typ. max. unit. remark rising time t r - - 10 ns note 1 falling time t f - - 10 ns note 1 high and low level pulse width t cph 299 308 319 ns cph1~cph3 cph pulse duty t cwh 40 50 60 % cph1~cph3 cph pulse delay t c12 t c23 t c31 70 t cph /3 t cph /2 ns cph1~cph3 sth setup time t suh 35 - - ns sthr,sthl sth hold time t hdh 35 - - ns sthr,sthl sth pulse width t sth - 1 - t cph sthr,sthl sth period t h 61.5 63.5 65.5 ? s sthr,sthl oeh pulse width t oeh - 3 - t cph oeh sample and hold disable time t dis1 - 28 - t cph oev pulse width t oev - 12 - t cph oev ckv pulse width t ckv 16 28 40 t cph ckv clean enable time t dis2 - 10 - t cph horizontal display start t sh - 0 - t cph /3 horizontal display timing range t dh - 480 - t cph /3 stv setup time t suv 400 - - ns stvl,stvr stv hold time t hdv 400 - - ns stvl,stvr stv pulse width t stv - - 1 t h stvl,stvr horizontal lines per field t v 256 262 268 t h note 2 vertical display start t sv - 3 - t h vertical display timing range t dv - 234 - t h vcom rising time t rcom - - 3 ? s vcom falling time t fcom - - 3 ? s vcom delay time t dcom - - 3 ? s rgb delay time t drgb - - 1 ? s note 1: for all of the logic signals. note 2: please don?t use odd horizontal lines to drive lcd panel for both odd and even fields simultaneously. b. timing diagram please refer to the attached drawings, from fig.2 to fig.6. www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 v e r s i o n : 1 p a g e : 8 /19 all rights strictl y reser v ed. any por t ion of this p a per shall not be reproduced, copied, or transformed t o any other forms without permission from au optronics corp . c. optical specification (note 1,note 2, note 3 ) i t e m s y m b o l c o n d i t i o n m i n . t y p . m a x . u n i t r e m a r k r i s e t r - 2 0 3 0 m s response time f a l l t f =0 - 3 0 4 0 m s note 4, 6 contrast ratio cr at optimized viewing angle 100 150 - note 5, 6 t o p 1 0 - - bottom 3 0 - - lef t 4 5 - - v i ewing angle right cr R 10 4 5 - - deg . note 6, 7 b r i g h t n e s s y l =0 2 0 0 2 5 0 - n i t n o t e 8 x 0 . 2 5 0 . 3 0 . 3 5 n o t e 8 whit e chromat i cit y y =0 0 . 3 0 . 3 5 0 . 4 note 1. ambient temperature =25 . and lamp current i l = 2.7marms. note 2. t o be measured in the dark room. no t e 3 . t o be me as ure d a t t h e c e nte r area of p a n e l wi th a vi e w in g co ne of 1 by t o pco n lum i na nce meter bm-7, af ter 10 minutes operation. note 4. definition of response time: the o u t put sign als of p hot ode te ct o r are me asured w h e n t h e inp u t sig nals a r e ch ang e d from ?black? to ?white?(falling time)and from ?white? to ?black?(rising time),respectively . the re sp on se time is def in ed as the t i me interv al be t w een th e 10% an d 9 0 % o f amplitudes. refer to figure as below . "b l a ck " tr tf "w h i t e " "w h i t e " 0% 10 % 90 % 10 0 % s i g n a l ( r e l a t i v e v a l u e ) www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 v e r s i o n : 1 all rights strictl y reser v ed. any por t ion of this p a per shall not be reproduced, copied, or transformed t o any other forms without permission from au optronics corp . p a g e : 9 /19 note 5. definition of contrast ratio: contrast ratio is calculated with the following formula. photodetector out p ut when lcd is at ?white? st ate contrast ratio (cr)= note 6. white v i =v i50 1.5v black v i =v i50 d 2.0v ? d ? means that the analog input signal swings in phase with com signal. ? ? means that the analog input signal swings out of phase with com signal. photodetector out p ut when lcd is at ?black? st ate v i50 : the analog input volt age when transmission is 50% the 100% transmission is defined as the transmission of lcd p a nel when all the input terminals of module are electrically opened. note 7. definition of viewing angle: refer to figure as below . note 8. measured at the center area of the p anel when all the input terminals of lcd p a nel are electrically opened. www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 version : 1 page : 10 /19 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. d. reliability test items: no. test items conditions remark 1 high temperature storage ta = 8 0 : 240h 2 low temperature storage ta = - 2 5 : 240h 3 high temperature operation ta = 6 0 : 240h 4 low temperature operation ta = 0 : 240h 5 high temperature and high humidity ta = 6 0 : . 95% rh 240h operation 6 heat shock -25 : ~80 : /50 cycle 2h/cycle non-operation 7 electrostatic discharge d 200v,200pf(0 ), once for each terminal non-operation frequency range : 10~55hz stoke : 1.5mm sweep : 10~55hz~10hz 2 hours for each direction of x,y,z 8 vibration (6 hours for total) jis c7021, a-10 condition a 9 mechanical shock 100g . 6ms, d x,d y, d z 3 times for each direction jis c7021, a-7 condition c 10 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz ?6db/octave from 200~500hz iec 68-34 11 drop (with carton) height: 80cm 1 corner , 3 ed g es , 6 surfaces note: ta: ambient temperature. www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 v e r s i o n : 1 p a g e : 1 1 /19 all rights strictl y reser v ed. any por t ion of this p a per shall not be reproduced, copied, or transformed t o any other forms without permission from au optronics corp . e.packing form www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 v e r s i o n : 1 p a g e : 12 /19 all rights strictl y reser v ed. any por t ion of this p a per shall not be reproduced, copied, or transformed t o any other forms without permission from au optronics corp . a u fig.1 outline dimension of tft -lcd module www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 v e r s i o n : 1 p a g e : 13 /19 all rights strictl y reser v ed. any por t ion of this p a per shall not be reproduced, copied, or transformed t o any other forms without permission from au optronics corp . fig.2 sampling clock timing 5 0 % 5 0 % 1 0 % 1 0 % 9 0 % 9 0 % s t h l ( r ) c p h 1 c p h 2 c p h 3 s t h t s u h t t h d h c 1 2 t t c 3 1 t c 2 3 c p h t t c w h t r f t www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 v e r s i o n : 1 p a g e : 14 /19 all rights strictl y reser v ed. any por t ion of this p a per shall not be reproduced, copied, or transformed t o any other forms without permission from au optronics corp . fig.3 horizont al display timing range i n p u t ( s t h l / s t h r ) o u t p u t ( s t h r / s t h l ) c p h 1 t d h www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 v e r s i o n : 1 p a g e : 15 /19 all rights strictl y reser v ed. any por t ion of this p a per shall not be reproduced, copied, or transformed t o any other forms without permission from au optronics corp . fig.4(a) horizont al timing o e h o e v v c o m 1 h t h v c d c c a c v c a c v v i d c b l a n k b l a c k v i a v i a c w h i t e b l a c k b l a n k w h i t e ( h s y ) s t h l ( r ) q 1 h v c k v g l r ( g b ) v v gl ac v gl _ h www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 v e r s i o n : 1 p a g e : 16 /19 all rights strictl y reser v ed. any por t ion of this p a per shall not be reproduced, copied, or transformed t o any other forms without permission from au optronics corp . fig.4-(b) det a il horizont al timing o e h o e v v c o m ( h s y ) s t h l ( r ) q 1 h v c k v g l r ( g b ) v 1 h t d i s 2 o e h t t d i s 1 t s t h t o e v t c k v t f c o m 1 0 % 9 0 % 9 0 % 1 0 % 1 0 % 9 0 % 5 0 % 5 0 % 1 0 % 9 0 % t d c o m t r c o m t d r g b www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 v e r s i o n : 1 p a g e : 17 /19 all rights strictl y reser v ed. any por t ion of this p a per shall not be reproduced, copied, or transformed t o any other forms without permission from au optronics corp . fig.5 v e rtical shif t clock timing s t v r ( l ) c k v 5 0 % 5 0 % t s u v h d v t t c k v www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 v e r s i o n : 1 p a g e : 18 /19 all rights strictl y reser v ed. any por t ion of this p a per shall not be reproduced, copied, or transformed t o any other forms without permission from au optronics corp . fig.6-(a) v e rtical timing (from up to down) v c o m ( e v e n f i e l d ) v c o m ( o d d f i e l d ) s t v l ( v s y ) q 1 h d i s p l a y o n p a n e l f i r s t l i n e v r ( g b ) ( h s y ) t s v www.datasheet.co.kr datasheet pdf - http://www..net/
: 413-212-089 v e r s i o n : 1 p a g e : 19 /19 all rights strictl y reser v ed. any por t ion of this p a per shall not be reproduced, copied, or transformed t o any other forms without permission from au optronics corp . fig.6-(b) v e rtical timing (from down to up) v c o m ( e v e n f i e l d ) s t v r ( v s y ) q 1 h d i s p l a y o n p a n e l f i r s t l i n e v r ( g b ) ( h s y ) t s v v c o m ( o d d f i e l d ) www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of A025CN01-V3

	To Download A025CN01-V3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .